ER5183
Category:
Product Introduction
Application: Used for the welding ocean,cold storage industry and structural application with an extremely high requirement to the high-strength,high impact fracture toughness and corrosion resistance,as well as the low-temperature storage tanks,railway industry,chemistry,food,ships,aerospace etc.Such as 5083 and 5654 base materials.
Characteristics: YH15183 is used for welding the base materials with a high magnesium content and high tensile strength or seawater corrosion resistance.This welding wire has excellent welding process properties with a beautiful formation of weld,stable electric arc and less splash.Used for the welding of 6xxx,6xxx and 5xxx.It is usually not recommended for the welding with a requirement of high temperature resistance due to its joint is sensitive to stress corrosion crack.
Chemical Composition Of Welding Wire:(Mass Fraction)
|
Item |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Al |
Be |
|
Guarantee Value |
≤0.40 |
≤0.40 |
≤0.10 |
0.05 -1.0 |
4.3 -5.2 |
0.05 -0.25 |
≤0.25 |
0.15 |
Remain |
≤0.0003 |
|
Typical Value |
0.08 |
0.12 |
0.006 |
0.65 |
4.75 |
0.130 |
0.005 |
0.080 |
Remain |
0.0001 |
Mechanical Properties Of Deposited Metal:(CO₂)
|
Item |
Tensile Strength Rm/MPa |
Yield Strength ReL/Rp0.2MPa |
Elongation A% |
|
Typical Value |
280 |
150 |
18 |
Welding Method:MIG Gas:99.99%Ar
Physical Properties:
|
Melting Temperature(℃) |
Density(g/cm³) |
|
579-638 |
2.65 |
Welding Reference Current:(Current Polarity:MIG DC+TIG AC)
|
MIG |
Wire Size(mm) |
1.2 |
1.6 |
2.0 |
|
Welding Current(A) |
180-300 |
200-400 |
240-450 |
|
|
Welding Voltage(V) |
18-28 |
20-20 |
22-34 |
|
|
TIG |
Wire Size(mm) |
1.6-2.5 |
2.5-4.0 |
4.0-5.0 |
|
Welding Current(A) |
150-250 |
200-320 |
220-400 |
Note On Usage:
1.It is required to remove the oxidation film and oil contaminant from the welding edge workpiece and surface of welding wire.
2.Itis able to support the molten metal with a plate during weldng to ensure the formation of weld.
Used for high eficiency welding in all positions with excellent welding performance such as warming electric arc,little spatters,beautiful seam forming and easily moved slag.Suitable for welding of 590 MPA high strength steel,steel structure,bridge,steel pipes,railway vehicle,and construction equipment etc.
Keywords:
ER5183
Product Message
*Attention: Please ensure accurate information filling and maintain smooth communication. We will contact you as soon as possible
YUNHE WELDING MATERIAL
Share to
Information Subscription
Welcome to leave your message of interest, we will contact you soon
Yaoguan Town, Wujin District, Changzhou, Jiangsu, China
Copyright©2025 Changzhou City Yunhe Welding Material Co.,Ltd.